Tweco 52 CutMaster - Manual (Page 13)

CUTMASTER 52
Manual 0-4961 GENERAL INFORMATION
1-7
1.04 Declaration of Conformity
Manufacturer: Victor Technologies
Address: 16052 Swingley Ridge Road, Suite 300
Chesterfield, MO 63033
USA
Serial numbers are unique with each individual piece of equipment and details description, parts used to manufacture a
unit and date of manufacture.
National Standard and Technical Specifications
The product is designed and manufactured to a number of standards and technical requirements. Among them are:
* UL (Underwriters Laboratory) rating 94VO flammability testing for all printed-circuit boards used.
* For environments with increased hazard of electrical shock, Power Supplies bearing the ' S ' mark conform to EN50192
when used in conjunction with hand torches with exposed cutting tips, if equipped with properly installed standoff guides.
* Extensive product design verification is conducted at the manufacturing facility as part of the routine design and manu-
facturing process. This is to ensure the product is safe, when used according to instructions in this manual and related
industry standards, and performs as specified. Rigorous testing is incorporated into the manufacturing process to ensure
the manufactured product meets or exceeds all design specifications.
* UL 60974-1:2012 Arc Welding Equipment; Part 1: Welding Power Sources
* CSA E60974-1: 2012 Arc Welding Equipment - Part 1: Welding Power Sources
* IEC 60974-1: 2012 Arc Welding Equipment - Part 1: Welding Power Sources
Victor Technologies has been manufacturing products for more than 30 years, and will continue to achieve excellence in
our area of manufacture.
Manufacturers responsible representative: Joe Mueller
Vice President/America's Sales and Marketing
Victor Technologies International, Inc.
16052 Swingley Ridge Road, Suite 300
Chesterfield, MO 63033
USA