Warning! disconnect input power before maintaining, Cutmaster 52 – Tweco 52 CutMaster User Manual
Page 51
Advertising
CUTMASTER 52
Manual 0-4961
SERVICE
5-1
SECTION 5 SYSTEM:
SERVICE
5.01 General Maintenance
Warning!
Disconnect input power before maintaining.
Each Use
Visual check of
torch tip and electrode
Weekly
Visually inspect the torch body tip,
electrode, start cartridge and shield cup
Visually inspect the
cables and leads.
Replace as needed
3 Months
Clean
exterior
of power supply
6 Months
Replace all
broken parts
Visually check and
Carefully clean the
interior
Maintain more often
if used under severe
conditions
Art # A-07938_AB
Advertising
This manual is related to the following products: