Cutmaster 52 – Tweco 52 CutMaster User Manual
Page 58
Advertising
CUTMASTER 52
SERVICE
Manual 0-4961
5-8
First & Second
Stage
Cartridges
(as marked)
Art # A-02942
Optional Two-Stage Filter Replacement
6. Slide the replacement Filter Elements into the Filter Assembly, with the same orientation as noted in Step 4
above.
7. Hand tighten the two bolts evenly, then torque each bolt to 20 - 30 in-lbs (2.3 - 3.4 Nm). Improper torque
may damage the gasket.
8. Slowly apply air pressure to the assembly, checking for leaks.
NOTE
A small amount of air leakage from the bottom fitting is normal.
This completes the parts replacement procedures.
Advertising
This manual is related to the following products: