Tweco 52 CutMaster - Manual (Page 14)

CUTMASTER 52
GENERAL INFORMATION Manual 0-4961
1-8
1.05 Statement of Warranty
LIMITED WARRANTY: Subject to the terms and conditions established below, Victor Technologies, Inc. warrants to
the original retail purchaser that new Victor Thermal Dynamics CUTMASTER™ plasma cutting systems sold after the
effective date of this warranty are free of defects in material and workmanship. Should any failure to conform to this
warranty appear within the applicable period stated below, Victor Technologies, Inc. shall, upon notification thereof and
substantiation that the product has been stored operated and maintained in accordance with Victor Thermal Dynamics’
specifications, instructions, recommendations and recognized industry practice, correct such defects by suitable repair
or replacement.
This warranty is exclusive and in lieu of any warranty of merchantability or fitness for a particular purpose.
Victor Thermal Dynamics will repair or replace, at its discretion, any warranted parts or components that fail due to defects
in material or workmanship within the time periods set out below. Victor Technologies, Inc. must be notified within 30
days of any failure, at which time Victor Technologies, Inc. will provide instructions on the warranty procedures to be
implemented.
Victor Technologies, Inc. will honor warranty claims submitted within the warranty periods listed below. All warranty
periods begin on the date of sale of the product to the original retail customer or 1 year after sale to an authorized Victor
Thermal Dynamics Distributor.
LIMITED WARRANTY PERIOD
Product
Power Supply Components
(Parts and Labor)
Torch and Leads
(Parts and Labor)
U.S. Non U.S.
CUTMASTER™ 39 4 Years 3 Years 1 Year
CUTMASTER™ 52 4 Years 3 Years 1 Year
CUTMASTER™ 82 4 Years 3 Years 1 Year
CUTMASTER™ 102 4 Years 3 Years 1 Year
CUTMASTER™ 152 4 Years 3 Years 1 Year
This warranty does not apply to:
1. Consumable Parts, such as tips, electrodes, shield cups, o-rings, starter cartridges, gas distributors, fuses, filters.
2. Equipment that has been modified by an unauthorized party, improperly installed, improperly operated or misused
based upon industry standards.
In the event of a claim under this warranty, the remedies shall be, at the discretion of Victor Technologies, Inc. :
1. Repair of the defective product.
2. Replacement of the defective product.
3. Reimbursement of reasonable costs of repair when authorized in advance by Victor Thermal Dynamics.
4. Payment of credit up to the purchase price less reasonable depreciation based on actual use.
These remedies may be authorized by Victor Thermal Dynamics and are FOB West Lebanon, NH or an authorized Victor
Technologies service station. Product returned for service is at the owner’s expense and no reimbursement of travel or
transportation is authorized.
LIMITATION OF LIABILITY: Victor Technologies, Inc. shall not under any circumstances be liable for special or consequential
damages such as, but not limited to, damage or loss of purchased or replacement goods or claims of customer of distributors
(hereinafter “Purchaser”) for service interruption. The remedies of the Purchaser set forth herein are exclusive and the liability
of Victor Thermal Dynamics with respect to any contract, or anything done in connection therewith such as the performance or
breach thereof, or from the manufacture, sale, delivery, resale, or use of the goods covered by or furnished by Victor Thermal
Dynamics whether arising out of contract, negligence, strict tort, or under any warranty, or otherwise, shall not, except as expressly
provided herein, exceed the price of the goods upon which liability is based.
This warranty becomes invalid if replacement parts or accessories are used which may impair the safety or performance
of any Victor Thermal Dynamics product.
This warranty is invalid if the Victor Thermal Dynamics product is sold by non - authorized persons.
Effective September 4, 2007