Tweco A80 CutMaster - Manual (Page 14)

CUTMASTER A80
GENERAL INFORMATION Manual 0-4985 1-8
1.08 Statement of Warranty
LIMITED WARRANTY: Subject to the terms and conaditions established below, Victor Thermal Dynamics ® Corporation warrants
to the original retail purchaser that new Victor Thermal Dynamics CUTMASTER™ plasma cutting systems sold after the effective
date of this warranty are free of defects in material and workmanship. Should any failure to conform to this warranty appear within
the applicable period stated below, Victor Thermal Dynamics Corporation shall, upon notification thereof and substantiation that
the product has been stored operated and maintained in accordance with Victor Thermal Dynamics’ specifications, instructions,
recommendations and recognized industry practice, correct such defects by suitable repair or replacement.
This warranty is exclusive and in lieu of any warranty of merchantability or fitness for a particular purpose.
Victor Thermal Dynamics will repair or replace, at its discretion, any warranted parts or components that fail due to defects in
material or workmanship within the time periods set out below. Victor Thermal Dynamics Corporation must be notified within
30 days of any failure, at which time Victor Thermal Dynamics Corporation will provide instructions on the warranty procedures
to be implemented.
Victor Thermal Dynamics Corporation will honor warranty claims submitted within the warranty periods listed below. All warranty
periods begin on the date of sale of the product to the original retail customer or 1 year after sale to an authorized Victor Thermal
Dynamics Distributor.
LIMITED WARRANTY PERIOD
Product
Power Supply Components
(Parts and Labor)
Torch and Leads
(Parts and Labor)
U.S. Non U.S.
CUTMASTER ® A40 4 Years 3 Years 1 Year
CUTMASTER ® A60 4 Years 3 Years 1 Year
CUTMASTER ® A80 4 Years 3 Years 1 Year
CUTMASTER ® A120 4 Years 3 Years 1 Year
This warranty does not apply to:
1. Consumable Parts, such as tips, electrodes, shield cups, o-rings, starter cartridges, gas distributors, fuses, filters.
2. Equipment that has been modified by an unauthorized party, improperly installed, improperly operated or misused based
upon industry standards.
In the event of a claim under this warranty, the remedies shall be, at the discretion of Victor Thermal Dynamics Corporation:
1. Repair of the defective product.
2. Replacement of the defective product.
3. Reimbursement of reasonable costs of repair when authorized in advance by Victor Thermal Dynamics.
4. Payment of credit up to the purchase price less reasonable depreciation based on actual use.
These remedies may be authorized by Victor Thermal Dynamics and are FOB West Lebanon, NH or an authorized Victor Technologies
service station. Product returned for service is at the owner’s expense and no reimbursement of travel or transportation is authorized.
LIMITATION OF LIABILITY: Victor Thermal Dynamics Corporation shall not under any circumstances be liable for special or
consequential damages such as, but not limited to, damage or loss of purchased or replacement goods or claims of customer
of distributors (hereinafter “Purchaser”) for service interruption. The remedies of the Purchaser set forth herein are exclusive
and the liability of Victor Thermal Dynamics with respect to any contract, or anything done in connection therewith such as the
performance or breach thereof, or from the manufacture, sale, delivery, resale, or use of the goods covered by or furnished by
Victor Thermal Dynamics whether arising out of contract, negligence, strict tort, or under any warranty, or otherwise, shall not,
except as expressly provided herein, exceed the price of the goods upon which liability is based.
This warranty becomes invalid if replacement parts or accessories are used which may impair the safety or performance of
any Victor Thermal Dynamics product.
This warranty is invalid if the Victor Thermal Dynamics product is sold by non - authorized persons.
Effective September 4, 2007