Tweco 300 DC Arcmaster - Manual (Page 60)

ARCMASTER 300 ACDC
11-2 February 22, 2006
11.03 Switching VRD On/Off
Switch the machine Off.
A) Remove the clear plastic cover from the control panel (see Figure 11-1).
• Lift up the cover so it rests on the top of the unit
• Place a small flat bladed screw driver between the cover hinge on the front panel
• Gently lift the cover hinge out of the front cover mounting hole
• Remove the control's clear plastic cover
1
2
2
3
Art # A-07079
Figure 11-1: VRD ON/OFF Step A
B) Remove the four mounting screws from the the control panel (see Figure 11-2).
1
1
1
1
2
Art # A-07080
Figure 11-2: VRD ON/OFF Step B