Tweco HMC-410 - Manual (Page 28)

HMC-410
2-10 July 27, 2005
35. ERROR LED—When lit, the control panel has detected
an error. Refer to the Operation - Operational Faults
section of this manual.
36. UPPER ENCODER — This encoder changes
parameters displayed in the upper display. Turning this
encoder clockwise increases the value of the
parameter and counterclockwise decreases the value
of the parameter.
NOTE
The (Arc Hours X100) information cannot be
changed with the upper encoder. To reset the
count to 0, refer to the Operation - Softswitch
Description chapter of this manual.
Art # A-04358
Figure 2-2: Front Panel Controls