Tweco HMC-410 - Manual (Page 75)

HMC-410
July 27, 2005 6-3
6.06 171238-19 Software Kits
The 171238-19 Software Kit has the following additional features (beyond all of the features described in the 171238-
17 described above):
Feature Benefit
1. Gun Switch Selectable Schedule A. Ability to change welding schedule by flickering gun switch in standby.
(RSE: Gun)
B. Useful for situations where welder may be away from welder, but still
wishes to change to an alternate welding schedule
2. Limited Segment Adjustment A. Limit ability to change parameters to just ‘weld’ segment
(AS) B. Avoid confusion to operators by allowing them to change only main
weld parameters.
Table 6-2 Software Kits 171238-19
See Softswitch Descriptions for details on these and other additions to the HMC-410 capability.
6.07 171238 Software Kits
A variety of software kits have been released for the HMC-
410. As new customer requests / requirements are
generated, these additional features are normally
implemented as a new dash number of kit. The following
table shows the softswitch screens, and which softswitch
screen is implemented with which kit number. The
softswitch description details the additional features
available with each kit. The standard HMC-410 is delivered
with the ‘-3’ software, and upgrades are available through
your normal channels.