Tweco 250i Multi Process Welding Inverter 2RT Wire Feeder - Manual (Page 12)

TRANSMIG 250i
GENERAL INFORMATION 1-6 Manual 0-5187
1.03 Declaration of Conformity
Manufacturer: CIGWELD
Address: 71 Gower St, Preston
Victoria 3072
Australia
Description of equipment: Welding Equipment (GMAW, FCAW, GTAW, MMAW) including, but not limited to CIGWELD
Transmig 250i Multi Process Welding Inverter, CIGWELD Transmig 2RT wire feeder and associated accessories.
Serial numbers are unique with each individual piece of equipment and details description, parts used to manufacture
a unit and date of manufacture.
The equipment conforms to all applicable aspects and regulations of the ‘Low Voltage Directive’ (Directive 73/23/EU,
as recently changed in Directive 93/68/EU and to the National legislation for the enforcement of the Directive.
National Standard and Technical Specifications
The product is designed and manufactured to a number of standards and technical requirements among them are:
• IEC 60974-10 applicable to Industrial Equipment - generic emissions and regulations.
• AS 1674 Safety in welding and allied processes.
• AS 60974.1 / IEC 60974-1 applicable to welding equipment and associated accessories.
Extensive product design verification is conducted at the manufacturing facility as part of the routine design and
manufacturing process, to ensure the product is safe and performs as specified. Rigorous testing is incorporated into
the manufacturing process to ensure the manufactured product meets or exceeds all design specifications.
CIGWELD has been manufacturing and merchandising an extensive equipment range with superior performance, ultra
safe operation and world class quality for more than 30 years and will continue to achieve excellence.