Cisco 3800 Series - Manual (Page 120)

90
Installing and Upgrading Internal Components in Cisco 3800 Series Routers
OL-5975-04
AIM Installation and Removal
Figure 57 Metal Standoffs
Step 3 Install the two machine-thread metal standoffs in place of the two screws labeled A in Figure 56 . Use a
1/4-inch nut driver to tighten the standoffs. See Figure 58 .
Caution Make sure that the standoffs are straight when installed. Tighten them gently but firmly. The shoulder
must be seated tight against the motherboard.
121202