Cisco 3800 Series - Manual (Page 131)

101
Installing and Upgrading Internal Components in Cisco 3800 Series Routers
OL-5975-04
Installing a Power Supply in a Cisco 3825 Router
Installing a DC Power Supply
The DC power supply has two power connectors, as shown in Figure 70 .
Figure 70 DC Power Supply
Follow these steps to attach the power supply to the power supply tray.
Step 1 Turn the tray right side up. Align the new power supply with the front wall of the tray.
Step 2 Replace and tighten the screws that hold the power supply to the tray.
Verify that the primary power cable is connected to the motherboard as shown in Figure 69 .
Make sure that the secondary power cable is connected to the motherboard as shown in Figure 71 .
1 Primary power connector 2 Secondary power connector
127781
1
2