Cisco 3800 Series - Manual (Page 98)

Installing Blank Faceplates over Empty HWIC Slots
68
Installing Interface Cards in Cisco 3800 Series Routers
OL-5974-01
To install blank faceplates over empty HWIC slots, follow these procedures:
• Single-wide slot—Attach a blank faceplate and tighten the two screws, using a number 1 Phillips
screwdriver.
• Double-wide slot—Install a slot divider as described in the “Installing and Removing Slot Dividers”
section on page 62 . Then install two blank faceplates and tighten the two screws in each blank
faceplate.
Tip Save blank faceplates for future use.