Tweco Victor Thermal Dynamics Power Module Upgrade Kit - Manual (Page 10)

10 Manual 0-5326
25. The system is designed in such a way that the top inverter module can use the lower module as a guide to
insert the new module into the center chassis. Place the top module lower rail onto the upper handle rail of
the lower module and rock forward into place.
Art # A-12355
26. Push the inverter module back into the unit until it seats against the chassis, there are two tabs that will have
to align with the center chassis. Make sure tab goes into the slot. While one operator is holding the module
in place, replace the M5 x 0.8 screws used for the blank chassis.
Art # A-12356