Tweco Victor Thermal Dynamics Power Module Upgrade Kit - Manual (Page 4)

4 Manual 0-5326
10. Reroute the cooling hose return from the lower position to the upper position. For 300 and 400 amp upgrades
use Figure 1B routing the hose behind the pilot board assembly and down from the inverter side down to
the coolant tank. Figure 1A 200A return hose routing. Figure 1B 300A and 400A return hose routing.
Art # A-12327
Figure 1a Figure 1b
11. Run new power cables from inverter side to the coolant side. There should be about 9" of cable sticking out
of the grommet to connect to the inverter.
Art # A-12328