Unitec Sierra Management System - Manual (Page 24)

Sierra Programming Reference Manual 14
3 . 1 . 2 . 6 X M L C r e d i t ( V e r i f o n e )
Figure 13. Verifone Credit Configuration
The Verifone credit configuration screen allows you to set up credit for the Unitec entry unit using a Verifone
POS system, used at C-stores. If you have a Wash Select II with the Sierra server, you will also be able to use
Speedpass when using the XML credit interface.
NOTE: The Verifone interface requires an activation code.
1. Select Unitec XML for the drop-down menu. If this is changed at a future date, you will need to
reboot the entry unit or site server.
2. Select the credit card brands that will be accepted. Check Others if fleet cards are to be supported.
3. Set POS Server IP Address to 192.168.31.11.
4. Select the Minimum Alert Level from the drop down menu. Informational alerts will send
notifications for all functions. Warning alerts will only send notifications when there is an
error in a component in the unit. Fault alerts only send notifications when the unit goes out
of service.
5. Click Save.
NOTE: The Verifone interface also requires that washes are dispensed in a specific order to match
the wash packages sold from the Verifone system.
1. Go to Device Profiles then click Edit by the unit profile. Go to Wash Dispensing.