Peripherals, Figure 29. peripherals screen – Unitec Sierra Management System User Manual
Page 40
Sierra Programming Reference Manual
30
6.
Relay Stacking – When Relay Stacking is enabled, the entry unit wash interface will not send arming
signals to the wash while it is in use. This needs to be “on” if an entry gate is being used in
conjunction with the unit.
7.
Click Save then Next to proceed to the peripherals set up page.
3.3.5 Peripherals
Figure 29. Peripherals Screen
Verify that the hardware components that are used in your entry unit are enabled (the box is checked in
the installed column). Please note that the coin dispensers in the Portal and Sentinel are labeled differently
due to different locations. Click the Edit button next to the component to configure the component
interface. If you are in the United States, ensure that USD is selected for Currency. The Portal and Sentinel
also support Canadian and Australian currencies. When all peripherals have been configured, click Next to
proceed to the User Interface set up page.
NOTE: The acceptor and dispenser functions are not present in the C-Start profile.