Added service dispensing, Figure 23. added services screen, Figure 24. added services settings screen – Unitec Sierra Management System User Manual
Page 35
Sierra Programming Reference Manual
25
3.3.3 Added Service Dispensing
Figure 23. Added Services Screen
NOTE: In order to configure the dispensing features for added services, you must first set up the added
service in the Products menu.
Any added services that will be offered at the entry units using this profile must be listed and configured
here. You may assign up to 4 added services per transaction. To add a new added service, select the service
from the drop down menu at the top of the screen and click the Add to List button. Click the Product Settings
button next to the service to configure the service. If you wish to delete an existing Added Service, click the
Remove from List button.
Figure 24. Added Services Settings Screen
1.
Select the relay(s) that will activate the added service, if necessary.
2.
Enter the Delay time in milliseconds. The delay time is the amount of time between when the wash
relay activation completes and added service relay is energized.