Unitec Sierra Management System - Manual (Page 36)

Sierra Programming Reference Manual 26
3. If you will be dispensing tokens with the added service, enter the quantity of tokens that will be
dispensed.
4. Enable the Receipt Required setting if the customer will need a receipt as ‘proof of purchase’ to
redeem the Added Service. If the printer is out of service or out of paper, the Added Service will not
be offered.
5. Click Save to return to the main Added Services page and the Next to proceed to the Wash
Dispensing page.
3.3.4 Wash Types and Washes Dispensed
Figure 25. Wash Types Dispensed Screen
The main page for Wash dispensing shows Wash Types that are configured in the profile. Each wash type
can be configured to offer up to (4) wash packages and up to (2) wash types are available (allowing up to 8
products to be sold). When (2) wash types are configured, the first screen a user will encounter will prompt
them to select the desired wash type. A typical application for multiple wash types would be a Flex Serve
operation where customers may choose to purchase only an exterior wash or a wash and express detail
package. In such a case, the products that are offered through the ‘Exterior Wash Only’ type would be
different than those offered through the ‘Wash plus Detail’.
If you plan to offer (2) wash types, click on the Add New Wash Type button to add the 2 nd type. Please note
that the Wash Type selection button displayed to the customer will include the Wash Type Name (as shown
in the table) so both the default and new wash types will need to be renamed.
To configure the wash packages, click the Edit button for the associated Wash Type.