Wash select ii device profile, 7 wash select ii device profile – Unitec Sierra Management System User Manual
Page 46
Sierra Programming Reference Manual
36
3.3.7 Wash Select II Device Profile
Figure 37. Wash Select II Profile Information Screen
1.
Enter the Profile Name. The default name for a new profile is Standard Wash Select.
2.
Enter the Alarm Duration in minutes.
3.
If you wish to offer added services to customers that purchased their wash with a code, check Offer
Added Services to Code Users box.
4.
If you wish to allow customers to purchase a wash with a combination of credit and cash, check the
Allow Split Tender with Credit Cards box.
5.
Click Next to navigate to the Added Services dispensed page.
Figure 38. Wash Select II Added Services Dispensed Screen
NOTE: In order to configure the dispensing features for added services, you must first set up the added
service in the Products menu. Once the added services are configured on the server, you MUST configure
the relays for the added services at the Wash Select II!