Unitec Sierra Management System - Manual (Page 55)

Sierra Programming Reference Manual 45
Figure 52. Paynode User Interface Screen
1. Select one of the following options for the Count Up Display:

Display Time

Display $

Display Time and Display $
2. Select the Warning Time (seconds before end of wash) This is only used in Count Down mode. When
the remaining transaction time reaches this value, the LCD display will start to blink.
3. Select Continuous or Pulsed for Beeper Output. Select “Continuous” if you are using a continuous-
tone Sonalert. Select “Pulsed” if a pulse-output Sonalert is being used.
4. Click Save then click Edit Customer Text to customize messages.