3 entry system configuration, 1 wash select ii settings, 1 enable barrier gate interface – Unitec American Parking Equipment User Manual
Page 31: Entry system configuration, Wash select ii settings, Enable barrier gate interface, Figure 21. wash select ii cpu board
Advertising
Document
Number:
GC1001
27
Document Title:
Unitec APE Gate and Gate Controller for Multi-Lane Applications Installation Guide
3 Entry
System
Configuration
3.1 Wash Select II Settings
Before a Wash Select II (WSII) unit will operate with the Gate Controller, some
configuration settings on the Wash Select II must be changed. Refer to the WSII
Operations Manual, Section 2.8.8: Wash Interface Settings Tunnel mode for more
information.
3.1.1 Enable Barrier Gate interface
You must enable the Barrier gate interface of the WSII in order for the WSII to
communicate with the gate controller.
Figure 21. Wash Select II CPU Board
Advertising