VICI M Series - Manual (Page 19)

15
8. Use the Dn (down) button to highlight the last line, then click the Insert
button.
9. For the newly inserted line, select Dispense in the pump function field,
then enter 110 for the volume and 1000 for the flow rate.
10. Click the End Edit button.
11. On the main menu, choose Method > Save, and call this method
“aspirate and dispense”.
The result should look like Figure 11.
TIP
The method in
Figure 11 is written so all functions will be automati-
cally performed when the Run button is clicked. For manual
operation, check the Event box for each action line. Then each
line is performed by clicking the Event button.
Figure 11: Example “Aspirate and Dispense” method for Model M6
Programming Application Methods