Viking Pump NORD TSM For NORDBLOC.1 Reducers - Manual

DRIVESYSTEMS
GENERAL INSTRUCTIONS
RETAIN FOR FUTURE USE
1. Importance of the operating instructions
These operating instructions are intended to provide general
information and safety guidelines. It is the responsibility of
the buyer, machine builder, installer and user of the NORD
product to make sure that all the proper safetynotes and op-
erating instructions have been reviewed and understood. If
the contents of this instruction or any applicable operating
instructions are not understood, please consult NORD.
WARNING
Electric motors, gearmotors, electrical brakes, variable
frequency drives, and gear reducers contain potentially
dangerous
high-voltage, rotating-components and
surfaces that may become hot during operation. All work
involved in the transport, connection, commissioning and
maintenance of any NORD product must be carried out by
qualified and responsible technicians.
2. Inspect incoming freight
Before accepting shipment from the freight company,
thoroughly inspect the NORD equipment for any shipping
and handling damage. If any goods called for in the bill of
lading or express receipt are damaged, or if the quantity is
short, do not accept until the freight express agent makes an
appropriate notation on your freight bill or express receipt. If
any concealed loss or damage is discovered later, notify your
freight carrier or express agent at once, and request a formal
review of your claim.
Claims for loss or damage in shipment must not be deducted
from the NORD invoice, nor should payment of the NORD
invoice be withheld awaiting adjustment of such claims, as
the carrier guarantees safe delivery. NORD will try to assist in
collecting claims for loss or damage during shipment; how-
ever, this willingness on our part does not remove the trans-
portation company’s responsibility in reimbursing you for col-
lection of claims or replacement of material.
3. Obtaining detailed operating instructions
One can receive the detailed installation and maintenance
instructions by entering a serial number (or NORD order
number) at the appropriate location on the NORD web site.
i. Record the serial number from your gearmotor, gear
reducer, or motor nameplate, or record the serial number
found on your order confirmation.
ii. Go to www.nord.com/docs to download the appropriate
operating instructions.
EXAMPLE: www.nord.com/docs
Unit documentation
You can receive your unit's installation and maintenance instructions by entering a serial number or and
order number. The order number can be found on your order confirmation. The serial number can be found
on the unit’s nameplate.
820932346200 Search
Information
Serial number 8209323462.00
Model type 9032.1AX-132 M/4 CUS BRE100 HL F IG22 VZ
Mounting position M4
Documents
BIM1040 - 90.1 & 92 Helical Bevel (US-English, 1350 KB)
BIM1002 - Hollow Keyed Shaft & Fixing Element Kit (US-English, 157 KB)
BIM1090 - Motor Brakes (US-English, 960 KB)
Kubler Encoder Wiring (US-English, 200 KB)
All Documents for 820932346200 (US-English, 2667 KB)
All Documents for 820932346200 (US-English, 2454 KB)
Unit Documentation
You can recieve your unit’s installation and maintenance instructions by entering a serial number or
order number. The order number/serial number can be found on your order confirmation or on the
unit’s nameplate.
4. Intended use
NORD is a supplier of electric motors, gearmotors, reduc-
ers, electromechanical brakes, mechanical variators, and
electrical variable frequency drives that are intended for
commercial installations on larger systems and machines.
WARNING
NORD does not accept any liability for damage or injury
caused by:
t
*OBQQSPQSJBUF
VTF

PQFSBUJPO
PS
BEBQUBUJPO
PG

the drive system.
t
6OBVUIPSJ[FE
SFNPWBM
PG
IPVTJOH
DPWFST

TBGFUZ
and inspection covers, guarding, etc.
t
6OBVUIPSJ[FE
NPEJmDBUJPOT
UP
UIF
ESJWF
TZTUFN
t
*NQSPQFS
TFSWJDJOH
PS
SFQBJS
XPSL
PO
UIF
ESJWF
TZTUFN
t
%BNBHF
DBVTFE
EVSJOH
TIJQNFOU
PS
USBOTQPSUBUJPO
t
%JTSFHBSE
PG
UIF
JNQPSUBOU
4BGFUZ
/PUFT
PS

Operating Instructions.
U10000 - 1 of 2
www.nord.com/docs 06.09.09
NORD Gear Corporation
Toll Free in the United States: 888.314.6673
NORD Gear Limited
Toll Free in Canada: 800.668.4378