Cisco OL-7822-06 - Manual (Page 3)

iii
Cisco Service Control Engine 1000 2xGBE Quick Start Guide
OL-7822-06
C O N T E N T S
C H A P T E R
1 Prepare for Installation 1-1
Information About Preparing for Installation 1-1
Site Preparation and Unpacking 1-1
Tools and Parts 1-2
Prepare for Rack-Mount Installation 1-2
Workbench or Tabletop Installation 1-2
C H A P T E R
2 Rack-Mount the SCE 1000 2-1
The SCE 1000 Mounting Brackets 2-1
Attach the Brackets to the SCE 1000 2-2
Installing the Crossrail Supports (Four-post rack only) 2-3
Assemble the Crossrail Supports 2-3
Attach the Crossrail Supports to the Rack 2-4
Mount the System to the Rack 2-4
C H A P T E R
3 Connect the Power Supply Units 3-1
Connect the Chassis Ground 3-1
Connecting the Power 3-2
Connect the DC-Input Power Supply Unit 3-3
Connect the AC-Input Power Supply Unit 3-4
C H A P T E R
4 Connect the Management Interfaces and Perform Initial System Configuration 4-1
Connect the Local Console 4-1
Perform the Initial System Configuration 4-2
Initial System Configuration 4-2
The Setup Command 4-3
Setup Command Parameters 4-4
Example 4-6
Step 1: Configuring Initial Settings 4-6
Example 4-7
Step 2: Configuring the Hostname 4-7
Step 3: Setting the Passwords 4-7