Attach the crossrail supports to the rack, Mount the system to the rack – Cisco OL-7822-06 User Manual
Page 14
2-4
Cisco Service Control Engine 1000 2xGBE Quick Start Guide
OL-7822-06
Chapter 2 Rack-Mount the SCE 1000
Mount the System to the Rack
Figure 2-5
Assembling the Slider Brackets
Step 2
Make sure that they are oriented so that both crossrails will support the SCE 1000 when they are attached
to the rack.
Attach the Crossrail Supports to the Rack
Step 1
Align the crossrail supports with the side of the rack, parallel to the floor.
Figure 2-6
Attaching the Crossrails to the Rack
Step 2
Insert and tighten two screws to the front posts or mounting strips of the rack
Step 3
Insert and tighten two screws to the Back posts of the rack.
Step 4
Repeat steps 2 and 3 on the other side of the rack, keeping the brackets flush against the posts and
parallel to the supporting bracket on first side of the rack.
Mount the System to the Rack
When the appropriate mounting brackets are securely installed, the SCE 1000 can be installed into the
rack.
3
2
1
92777
3
2
1
92778