Single link: receive-only topology, Cisco sce 1000, 2xgbe – Cisco OL-7822-06 User Manual
Page 48: Network subscriber
5-2
Cisco Service Control Engine 1000 2xGBE Quick Start Guide
OL-7822-06
Chapter 5 Cable the Line Ports
Information About Cabling
Figure 5-1
Bump-in-the-Wire Installation
Single Link: Receive-only Topology
In this topology, an external optical splitter resides physically on the GBE link between the subscriber
side and the network side. The external splitter is connected to the SCE 1000 via Rx links only.
In this topology, the traffic passes through the external splitter, which splits traffic to the SCE 1000. The
SCE 1000, therefore, is in receive-only topology, having only traffic monitoring capabilities.
Note
Receive-only topologies can also be implemented using a switch. Such a switch must support SPAN
functionality that includes separation between ingress and egress traffic and multiple SPAN-ports
destinations.
Cisco SCE 1000
Series
2xGBE
LINK RX TX
RX
MM
TX
LINK RX TX
RX
MM
TX
GBE-1
SUB
LINE
NET
PWR B
STATUS
PWR A
BYPASS
Router/Switch
Router/Switch
Subscriber
92964
Network
Network
Subscriber