Great Plains 3S-5000HDF Operator Manual - Manual (Page 27)

2012-08-14 Table of Contents Index 195-325M
Great Plains Manufacturing, Inc. Table of Contents Index Operating Instructions 23
Operating Instructions
This section covers general operating procedures.
Experience, machine familiarity, and the following
information will lead to efficient operation and good
working habits. Always operate farm machinery with
safety in mind.
Pre-Start Checklist
Perform the following steps before transporting the
3S-5000/F/HD/HDF Drill to the field.
❑ Carefully read “Important Safety Information” on
page 1.
❑ Lubricate planter as indicated under “Lubrication”
on page 68.
❑ Check all tires for proper inflation. See
“Specifications and Capacities” on page 79.
❑ Check all bolts, pins, and fasteners. Torque as
shown in “Torque Values Chart” on page 84.
❑ Check planter for worn or damaged parts. Repair or
replace parts before going to the field.
❑ Check hydraulic hoses, fittings, and cylinders for
leaks. Repair or replace before going to the field.
❑ Perform all beginning-of-season and daily service
items under “Maintenance” on page 59.
High Pressure Fluid Hazard:
Relieve pressure before disconnecting hydraulic lines. Use a
piece of paper or cardboard, NOT BODY PARTS, to check for
leaks. Wear protective gloves and safety glasses or goggles
when working with hydraulic systems. Escaping fluid under
pressure can have sufficient pressure to penetrate the skin
causing serious injury. If an accident occurs, seek immediate
medical assistance from a physician familiar with this type of
injury.