00hd row unit adjustments – Great Plains 3S-5000HDF Operator Manual User Manual

Page 53

Advertising
background image

Great Plains Manufacturing, Inc.

Table of Contents

Index

Adjustments

49

2012-08-14

Table of Contents

Index

195-325M

00HD Row Unit Adjustments

The 3S-5000/F/HD/HDF has double-disk openers with
depth-controlling press wheels mounted on floating
opener frames. Opener bodies are staggered for easy
soil flow. All openers pivot on a common axis to maintain
consistent depth as the opener frames follow contours. A
spring provides the down pressure necessary for opener
double disks to open a seed furrow. The spring allows
openers to float down into depressions and up over
obstructions. Individual openers can be adjusted to
account for tire tracks.

Refer to Figure 45 (which depicts a row unit fully populated
with all optional accessories supported for use with the
3S-5000/F/HD/HDF drill)
From front to back, a Great Plains 00HD Series row unit
can include the following capabilities (some optional):

1.

Opener height adjustment: standard
If a few rows need to run deeper, such as in tire
tracks, the arm’s pivot point may be lowered. See
Opener Height” on page 50.

2.

Single Down Pressure Spring: standard
Each row unit is mounted on the drill as a pivoting
arm which allows the row unit to independently move
up and down. The adjustable spring provides the
force to get the row unit and attachments into the
soil. See “Row Unit Down Pressure (Spring)” on
page 50.

3.

Disc Blades: standard, 2 per row unit
Double disk blades open a furrow, creating the seed
bed. Spacers adjust the blades for a clean furrow.
See “00 Row Unit Adjustments” on page 48.

4.

Main seed delivery tube: standard
No adjustments are necessary.

5.

Fertilizer delivery tube: optional
The tube may be reversed to drop fertilizer with the
main seed, or just ahead of the press wheels.

6.

Small Seeds delivery tube: optional
The tube may be reversed to drop small seed near
the main seed tube, or just ahead of the press
wheels.

If fertilizer is also installed, the Small Seeds tube is
mounted outside the opener frame.

7.

Disk Scraper: optional
In sticky soils, a scraper helps keep the opener disks
operating freely. See “Carbide Disc Scraper” on
page 75.

8.

Seed firmer: seed flap (not shown) standard:

Keeton

®

seed firmer (shown)

Improves seed-soil contact, and provides a stable
arm for a low-rate liquid fertilizer delivery tube. See
Keeton

®

Seed Firmer Adjustment” on page 53.

Seed-Lok

®

firming wheel (not shown)

Improves seed-soil contact. See “00 Series
Seed-Lok

®

Lock Up” on page 53.

9.

Press wheels: standard (choice of types)
These close the seed trench. The wheels also
support the free end of the row unit, and provide the
primary control over seeding depth. See “00 & 00HD
Series Opener Depth
” on page 54.

Equipment Damage Risk:
Do not back up with row units in the ground. To do so will
cause severe damage and row unit plugging.

Figure 45

00HD Series Row Unit

26427

1

2

3

7

4

8

9

5

6

6

Advertising
This manual is related to the following products: