Great Plains YP1625 Material Rate - Manual (Page 36)

401-226B 8/8/2006
36
Refer to Figure 7
9. Enter your planned planting speed using Up/
Down arrow keys. Calibration mode will not ac-
cept a speed higher than 10 mph. Press Func-
tion key to advance to next window.
Refer to Figure 8
10. Enter the amount of seed you want to measure.
For volumetric metering, this should be at least
1/4 of a lb. For singulated metering, at least 100
seeds should be selected. Press Function key
to advance to next window.
Refer to Figure 9
11. The cab console is informing you the length of
time that the drive will be operating, in order to
meter the amount of seed you have requested,
at the calibration number, drill width, and num-
ber of rows you have selected. Press Function
key to advance to next window.
22721
22780
22781
Figure 7
Figure 8
Figure 9