Great Plains YP1625 Material Rate - Manual (Page 38)

401-226B 8/8/2006
38
Refer to Figure 13
14. Continuing to verify that the drive area is clear,
press the Engage key to start drive rotation.
Pressing Function key will exit calibration mode.
Refer to Figure 14
15. While the drive is rotating, the display window
shows the time remaining and the “Out” rate.
CONTINUE TO MONITOR DRIVE AREA DUR-
ING DRIVE ROTATION. PRESS THE ENGAGE
KEY (OR OFF KEY) TO STOP DRIVE DURING
CALIBRATION.
Refer to Figure 15
16. After Calibration meter rotation has ended, this
screen will appear.
22726
22783
22784
Figure 13
Figure 14
Figure 15