Great Plains PM400 Monitor Operator - Manual (Page 42)

OPERATOR’S MANUAL
PM300, PM332, PM400 Planter Monitors
11001-1372-200606
36 / MONITORING PLANTING
Figure 24
Upper Parameters Screen
Changing Number of Parameters
The parameter lines display can be configured to show 2, 3, or 4
parameters at one time by changing the size of the parameters. The Up
and Down Arrow keys are used at the Operate screen to scroll down to
see all parameters being monitored.
To Change the Number of Parameter Lines:
1. Press the Display & Service key with the Upper Parameter icon
highlighted.
2. Press the Enter key.
3. Press the Down Arrow key to highlight the magnifying glass.
4. Press Enter key to select the icon. Use the Up or Down Arrow key to
toggle through the options for 2, 3 or 4 display lines.
5. Press Enter to confirm the selection.
Figure 25
Parameter Line Options
1
2
1
3
aA
Graphics/Text Mode
Increases/Decreases
Parameter Lines
SET UPPER PARAMS
Parameter
Lines
123.4
43.8
1 2 3 4
DISPLAY
&
SERVICE
ENTER
16.8
33.1
5.4
33.1
8
33.5
25
37.2
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18
4.5
1
12.5
16.8 ...
13
9
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18
2 Parameter Functions 3 Parameter Functions 4 Parameter Functions
Upper Parameter icon
Enter key
Up or Down Arrow key