Introduction, Models covered, Description of unit – Great Plains TC5319 (S/N A1420X+) Operator Manual User Manual
Page 14: Document family, Using this manual, Definitions, Introduction models covered description of unit, Document family using this manual definitions, Models covered description of unit
10
TC5109-5323
Great Plains Manufacturing, Inc.
566-224M
03/06/2014
Introduction
Great Plains welcomes you to our growing family of new
product owners. The TC5109-5323 have been designed
with care and built by skilled workers using quality mate-
rials. Proper setup, maintenance, and safe operating
practices will help you get years of satisfactory use from
the machine.
Models Covered
Description of Unit
The TC5109-5323 is a one or three-section “vertical” till-
age tool. Working width ranges from 11 to 29 feet. The
implement is designed to cut, size and bury residue. It
can work up to 11” deep, will dislodge rootballs and leave
the field smooth enough for “one pass” finishing in
Spring. For optimum leveling of your machine, it should
be equipped with either a Chopper Reel or Buster Bar
attachment.
Document Family
Using This Manual
This manual will familiarize you with
safety, assembly, operation, adjust-
ments, troubleshooting, and mainte-
nance. Read this manual and follow
the recommendations to help
ensure safe and efficient operation.
The information in this manual is current at printing.
Some parts may change to assure top performance.
Definitions
The following terms are used throughout this manual.
A crucial point of information related to the preceding topic.
Read and follow the directions to remain safe, avoid serious
damage to equipment and ensure desired field results.
Note: Useful information related to the preceding topic.
Right-hand and left-hand as used in
this manual are determined by facing
the direction the machine will travel
while in use unless otherwise stated.
An orientation rose in some line art
illustrations shows the directions of:
Up, Back, Left, Down, Front, Right.
TC5109
11-Foot 1-section
TC5111
14-Foot 1-section
TC5113
16-Foot 1-section
TC5115
19-Foot 1-section
TC5313
16-Foot 3-section
TC5315
19-Foot 3-section
TC5317
21-Foot 3-section
TC5319
24-Foot 3-section
TC5321
26-Foot 3-section
TC5323
29-Foot 3-section
Figure 1
Turbo Max
41977
L
R
U
D
F
B
L
R
566-224Q-ENG Assembly Manual
566-224Q
Pre-Delivery Manual
566-224M
Operator Manual (this document)
566-224P
Parts Manual
U
D
F
B
L
R
- TC5323 (S/N A1420X+) Operator Manual TC5321 (S/N A1420X+) Operator Manual TC5317 (S/N A1420X+) Operator Manual TC5315 (S/N A1420X+) Operator Manual TC5313 (S/N A1420X+) Operator Manual TC5115 (S/N A1420X+) Operator Manual TC5113 (S/N A1420X+) Operator Manual TC5111 (S/N A1420X+) Operator Manual TC5109 (S/N A1420X+) Operator Manual