Great Plains TC5319 (S/N A1420X+) Operator Manual - Manual (Page 24)

20 TC5109-5323 Great Plains Manufacturing, Inc.
566-224M 03/06/2014
Field Operation
This implement is designed to be pulled in the field with
the machine engaged (including wide turns). Lifting for
short distances to clear residue clogs is acceptable. Lift-
ing for tight turns or reverse moves is required.
Equipment Damage Risk:
Lift for tight turns and reverse moves. Tight turns can result in
a section moving backward. Never back up with harrows on
the ground. If the inside tire stops or rolls backward, the turn is
tight and requires lift.
Field Set-Up Checklists
Use the following tables to develop a final checklist for
your tractor/Turbo-Chisel configuration. Additional or
fewer steps may be necessary depending on tractor fea-
tures, Turbo-Chisel options and planting accessories.
Mechanical Checklist (Tractor Hitching) Page
Turbo-Chisel hitched 13
Hitch pin locked
Safety chain secured to tractor or leading
implement
13
Parking jack stowed 13
Electrical Checklist Page
Verify electrical hookups solid, or connec-
tor securely stowed if not using lights in
field.
14
Hydraulic System Checklist Page
Check tractor hydraulic reservoir full -
Make hydraulic connections 14
Inspect connections for leaks -
Unfold Implement