Great Plains NTA2007HD Installation Instructions - Manual

Great Plains Mfg., Inc. Parts Installation Instructions 1
2013-10-16 ©Copyright 2013 113-921M
2014+ Single Fold Marker
6 Meter / 20 Foot HD Air Drill Implements
General Information
These instructions explain how to install field markers on
a compatible air drill implement.
These instructions apply to an installation of:
One kit includes two markers (left and right), an
automatic sequence valve, all hydraulic hoses and
fittings, and all necessary mounting hardware.
One kit updates one air drill.
Note: This manual applies to kits manufactured in 2014
or later. For kits manufactured in 2013 or earlier,
see manual 113-850M.
Note: Part numbers, descriptions and instructions in the
present manual are correct for 2014+ kits. Some
illustrations may depict similar prior components.
Notations and Conventions
“Left” and “Right” are facing in the
direction of machine travel. An
orientation rose in the line art
illustrations shows the directions of
Left, Right, Front, Back, Up, Down.
Call-Outs
Related Documents
Have the Operator Manual at hand for drill movements.
Have the current Parts Manual at hand for parts ID.
Parts and Tools Required
• You need a suitable tractor for positioning the air drill,
and having sufficient hydraulic circuits, with adequate
capacity to operate the markers (installing markers
increases the required circuits to 3).
• You need a hoist with 136 kg (300 pound) capacity.
• Have safety goggles and gloves for inspecting
hydraulic connections.
• Other than the hoist, only basic hand tools are
required.
• A few cable ties are required to secure hoses.
If orange colored ties are available, 6 can also be used
to identify hoses.
• 5 liters (1.2 gallons) of hydraulic fluid is needed to
charge the marker system.
Used with: When you see this symbol, the subsequent instructions and
warnings are serious - follow without exception.
Your life and the lives of others depend on it!
• NTA607, NTA607HD
• NTA2007, NTA2007HD
Kit Kit Description
113-849A NTA607HD-NTA2007HD MARKER BDL
Figure 1
Marker Kit
36055
U
D
F
B
L
R
to
Single-digit callouts identify components in
the currently referenced Figure or Figures.
Two-digit callouts in the range 11 to 19
reference existing parts (see page 20).
to
Two-digit callouts in the range 21 to 82
reference new parts (see list on page 19).
166-283M NTA607HD/2007HD Operator Manual
166-372M NTA607/2007 Operator Manual
166-372M-ENG NTA607 Operator Manual (EU)
166-283P NTA607HD/2007HD Parts Manual
166-372P NTA607HD/2007HD Parts Manual
U
D
F
B
L
R
1 9
11
21 82