Danger, Warning, Caution – Great Plains EWD13 4109R+ Operator Manual User Manual

Page 3

Advertising
background image

4/8/99

0-2

175-083M-A

INTRODUCTION

Your Great Plains End Wheel Drill is designed to give you many years of dependable service. This
manual has been prepared to instruct you in the safe and efficient operation of this machine. Read
and study it thoroughly. Follow all instructions and service procedures carefully.

The parts on your End Wheel Drill have been specially designed and should only be replaced with
genuine Great Plains parts. Therefore; should your drill require replacements parts, purchase them
from your Great Plains Dealer.

Space has been provided below for you to record your model number and serial number of your drill.
Be sure to bring this information with you to your dealer when ordering parts or attachments for your
drill.

The following signal symbol and words should be clearly understood! When seen in this manual or
on your equipment, this symbol and words will alert you to the seriousness of a situation. They
should not be ignored or taken lightly.

The SAFETY ALERT SYMBOL indicates that there is a potential hazard to personal safety

involved and extra safety precautions must be taken. When you see this symbol, be alert and care-
fully read the message that follows it. In addition to design and configuration of equipment; hazard
control and accident prevention are dependent upon the awareness, concern, prudence and proper
training of personnel involved in the operation, transport, maintenance and storage of equipment.

DANGER:

Indicates an imminently hazardous situation which, if not avoided, will result in death

or serious injury. This signal word is limited to the most extreme situations.

WARNING:

Indicates a potentially hazardous situation which, if not avoided, could result in

death or serious injury.

CAUTION:

Indicates a potentially hazardous situation which, if not avoided, may result in minor

or moderate injury. It may also be used to alert against unsafe practices.

Thank you for buying a Great Plains End Wheel Drill.

SERIAL NUMBER ___________________

MODEL NUMBER ___________________

DATE PURCHASED _________________

!

Advertising