Using this manual, Definitions, Owner assistance – Great Plains 2525F Operator Manual User Manual
Page 15: Product support
Introduction 11
01/23/2012
118-232M
Using This Manual
This manual will familiarize you with safety, assembly,
operation, adjustments, troubleshooting, and mainte-
nance. Read this manual and follow the recommenda-
tions to help ensure safe and efficient operation.
The information in this manual is current at printing.
Some parts may change to assure top performance.
Definitions
The following terms are used throughout this manual.
Right-hand and left-hand as used in this manual are
determined by facing the direction the machine will travel
while in use unless otherwise stated.
A crucial point of information related to the preceding topic.
Read and follow the directions to remain safe, avoid serious
damage to equipment and ensure desired field results.
Note: Useful information related to the current topic.
Owner Assistance
If you need customer service or repair parts, contact a
Great Plains dealer. They have trained personnel, repair
parts and equipment specially designed for Great Plains
products.
Refer to Figure 3
Your machine’s parts were specially designed and
should only be replaced with Great Plains parts. Always
use the serial and model number when ordering parts
from your Great Plains dealer. The serial-number plate is
located on the left end of the seed box tool bar, as
shown.
Record your drill model and serial number here for quick
reference:
Model Number:__________________________
Serial Number: __________________________
Your Great Plains dealer wants you to be satisfied with
your new machine. If you do not understand any part of
this manual or are not satisfied with the service received,
please take the following actions.
1.
Discuss the matter with your dealership service man-
ager. Make sure they are aware of any problems so
they can assist you.
2.
If you are still unsatisfied, seek out the owner or gen-
eral manager of the dealership.
For further assistance write to:
Product Support
Great Plains Mfg. Inc., Service Department
PO Box 5060
Salina, KS 67402-5060
785-823-3276
Figure 2
Left/Right Notation
18327
L
R
Figure 3
Serial Number Plate
18307