Great Plains 2525F Operator Manual - Manual (Page 17)

Preparation and Setup 13
01/23/2012 118-232M
Making Hydraulic Connections
Only trained personnel should work on system hydraulics!
Great Plains hydraulic hoses are color coded to help you
hookup hoses to your tractor outlets. Hoses that go to
the same remote valve are marked with the same color.
Refer to Figure 4
To distinguish hoses on the same hydraulic circuit, refer
to plastic hose label. The hose under an extended-cylin-
der symbol feeds a cylinder base end. The hose under a
retracted-cylinder symbol feeds a cylinder rod end.
FigureSpacer
Making Electrical Connections
Refer to Figure 5
Make sure tractor is shut down with accessory power off
before making connections.
1. Mate the lighting plug to the outlet connector on
the drill.
2. Mate any accessory or aftermarket device connec-
tions.
3. Secure cables so they are clear of moving parts of
the 3-point hitch.
Color Hydraulic Function
Orange Marker Cylinders
FigureSpacer
Figure 4
Plastic Hose Label
817-348c
17641
FigureSpacer
Figure 5
Lighting Connector
25236
1
1