Great Plains DVN8324 Operator Manual - Manual (Page 23)

Great Plains Manufacturing, Inc. Preparation and Setup 19
11/25/2013 550-466M
Refer to Figure 5
4. Use parking jack to raise and lower Discovator
tongue.
5. Remove hitch pin from tractor draw-bar.
6. Back tractor draw-bar into alignment with hitch . Set
tractor parking break.
7. Secure with a locking hitch pin.
8. Secure safety chain to an anchor on the tractor.
9. Retract jack foot.
10. After hitching tractor to implement, store parking jack
on storage stob on Discovator tongue.
11. Connect hydraulic hoses (page 20).
12. Connect brake hoses (option, page 22).
13. Connect electrical cables (option, page 19).
Electrical Hookup
Refer to Figure 6
Make sure tractor is shut down with accessory power off
before making connections.
14. Mate lighting connector to tractor outlet.
15. Mate any optional or after-market electrical connec-
tors.
16. Make connections prior to 8315-8324DVN move-
ment.
4
Figure 5
Parking Jack and Hitch
42184
1
2
3
1
3
3
4
Figure 6
Lighting Connector European
and North American
41995
25236