Install h.r. orifices, Install h.r. drop lines – Great Plains YP Fertilizer System User Manual
Page 19
Great Plains Mfg., Inc.
Installation Instructions
19
02/29/2008
407-197M
Install H.R. Orifices
Refer to Figure 36
The nozzles do not have orifice plates
pre-installed, as
there is a choice of 3 sizes included. Consult the planter
Operator and Seed Rate manuals and determine which
plate size is the most likely for your next application.
102. Select one of the following sets:
103. Twist to unlock each nozzle, insert a plate,. and re-
lock.
Note: You can skip any positions that are to be capped at
Note: No special precautions are necessary at this time,
but after using the system, always wear protective
gloves when changing orifice plates.
Install H.R. Drop Lines
If your planter has fewer than 32 high rate zones, some
positions get caps instead of drop lines.
104. Raise the planter and install transport locks.
105. Lower the row units.
106. Select:
107. If not already installed on the nozzles, select:
Not all of the caps may be used.
Qty
Call
Part
Description
32
832-053C ORIFICE SPR SYS CP4916-34 SS
32
832-054C ORIFICE SPR SYS CP4916-48 SS
32
832-056C ORIFICE SPR SYS CP4916-28 SS
Figure 36
H.R. Orifice Installation
21983
4
Qty
Call
Part
Description
-
990-080R HOSE 3/8 ID 150PSI EPDM
64
800-126C CLAMP WRM DRV #5 SS (.44-.70)
16
832-042C NOZZLE SHUT OFF CAP W/ GASKET
32
800-303C CABLE TIE 2 DIA MIN - BLK
Qty
Call
Part
Description
32