Great Plains YP Fertilizer System - Manual (Page 23)

Great Plains Mfg., Inc.
Installation Instructions 23
02/29/2008 407-197M
Pump to Starter Relief Valve Hose
126. Select:
Refer to Figure 42
127. Route the hose from the outlet elbow of the pump
to the inlet adaptor of the relief valve.
128. Secure the hose to the relief valve with a clamp
.
129. At the pump end, allowing some slack, cut the hose
to length and secure it to the outlet elbow with a
clamp .
Starter Hose to Left Wing Boom
130. Select:
Refer to Figure 43
131. Connect the hose
to the adaptor at the outlet
tee of the relief valve assembly. Secure with clamp
.
132. Route the hose to the elbow and tee at the
center of the left wing boom.
133. Allowing a small amount of slack, cut hose to length
and secure with clamp .
Qty Call Part Description
- 990-082R HOSE 1 ID 200PSI EPDM
2 800-257C CLAMP WRM DRV #20SS (.81-1.75)
Figure 42
Pump to Starter Relief Valve
27113
163
195
163
3
2
195
163
2
3
195
163
2
163
Qty Call Part Description
- 990-081R HOSE 3/4 ID 200PSI EPDM
2 800-257C CLAMP WRM DRV #20SS (.81-1.75)
Figure 43
Starter Relief Valve to Left Boom
27113
163
163
4
194
180
194
163
194 4
163
194 180
163