Great Plains 3S-5000HD Assembly Instructions - Manual (Page 12)

8 3S-5000/F/HD/HDF SGS Table of Contents Index Great Plains Manufacturing, Inc.
133-415M Table of Contents Index 2013-07-30
Remove Walkboards
There are two walkboards per section, six total. Due to
length differences, ladders and decals, each is unique to
its section and side of section. Mark each by position to
aid in re-assembly.
Refer to Figure 10
18. Fold ladders (not shown) into storage/transport
position on top of wing walkboards.
Start with the left wing section.
19. Position and attach lift or hoist to support the full
weight of a walkboard.
20. At each end of the walkboard, remove and save two
sets:
803-020C NUT HEX 1/2-13 PLT
804-015C WASHER LOCK SPRING 1/2 PLT
802-034C HHCS 1/2-13X1 1/4 GR5
21. Move the walkboard clear of the work area.
Walkboards remain dismounted to ease access to
the rear of the seed boxes. They are re-installed
starting at step 129 on page 30.
21
25
U
D
B
F
R
L
17
Figure 10:
Remove Walkboard
34306
21
25
17