Great Plains DVN8552 Assembly Manual - Manual (Page 43)

Great Plains Manufacturing, Inc. Assembly 39
02/12/2014 550-353Q-ENG
Angled Gang Depth Indicator Installation
Note: See layout section for proper depth indicator tower
placement.
Refer to Figure 42
197.Attach depth indicator tower
(models 8333C-8552C)
to tube of center wing brace as shown, secure with 1/2
x 3 1/32 x 3 u-bolts
, 1/2 lock washers and 1/2 nuts.
198.The rest of the parts install like, See “Straight Gang
Depth Indicator” on page 38.
Install Depth Guide Decal
Refer to Figure 43
199.Be sure the spring preload is set at dimension shown.
Move the top of the gang blades to the dimension
shown. Clean the front of the plate on the tower and
place the decal with the pointer at “O”.
200.See Operating Section in “Operator’s Manual” for
proper depth in field operation.
8
Figure 42
Angled Gang Depth Indicator
41677
8
9
8
9
Figure 43
Depth Guide Decal Placement
41577