Great Plains DVN8552 Assembly Manual - Manual (Page 8)

550-353Q-ENG 02/12/2014
4 8321-8552DV Great Plains Manufacturing, Inc.
Introduction
The Discovator has been designed with care and built by
skilled workers using quality materials. Proper setup,
maintenance, and safe operating practices will help the
customer get years of satisfactory use from the machine.
Description of Unit
The Series VIII, 8321-8552DV Discovator is a three or
five-section field finishing, one-pass tillage tool. Working
width ranges from 21 to 52 feet. The implement is
designed to combine discing/slicing, cultivating, harrow-
ing and herbicide incorporation in a single pass. Various
finishing attachments are available to customize your till-
age and residue requirements for your operation
Models Covered
Document Family
Tools Required
• Basic Hand Tools
• Torque Wrench
• Fork Truck, Overhead Hoist or Loader
Pre-assembly Checklist
1. Before assembling, read and understand “Important
Safety Information” in front part of this manual.
2. Have at least two people on hand while assembling.
3. Make sure area is level and free of obstructions
(preferably an open concrete area).
4. Have all major components
5. Have all fasteners and pins shipped with Discovator.
8321DV 21-Foot 3-section
8324DV 24-Foot 3-section
8326DV 26-Foot 3-section
8328DV 28-Foot 3-section
8333DV 33-Foot 3-section
8537DV 37-Foot 5-section
8544DV 44-Foot 5-section
8548DV 48-Foot 5-section
8552DV 52-Foot 5-section
550-353Q-ENG Assembly Manual (this document)
550-353Q Pre-Delivery Manual
550-353M Operator Manual
550-353P Parts Manual
Figure 1
Discovator
41645