Great Plains 7336 DH Predelivery Manual - Manual (Page 20)

16 Series II Disk Harrow Great Plains Manufacturing, Inc.
556-235Q 2014-06-25
Light Brackets and SMV Assembly
Refer to Figure 15
43. Install the amber light bracket assemblies
to rear
gang bars with the u-bolts provided with brackets.
Position the amber light brackets
between the
gang bar mounting plate and the c-shank mounting
plate. The placement may need small adjustments to
avoid the tires during field operation and the wings
while folding and unfolding.
44. Attach red lights and the SMV sign on the wing
stops with the bolts, lock washers and the nuts pro-
vide in the locations shown.
45. Connect the wiring harness leads marked right and
left, red and amber to the appropriate side of the
machine for turn signals to be correct. For the amber
lights, thread the wires through the light bracket tub-
ing before connecting to the lights. For the red lights
run wires long sides of the wing stops and secure
with zip ties.
46. Tighten all bolts to specs, See “Torque Values
Chart” on page 19.
1
1
2 3
1
2
3
1
Figure 15
Narrow Center Lights
43462