Great Plains DVN8552 Parts Manual - Manual (Page 117)

Revision Comments Part Description Part No. Ref.
Image No. dwg41918
MW ROD CLEVIS 1.00PN 1.5-12THD 1M7021-ADI 1.
MW ROD 2S7574NC 2.
Rev. 2 (S/N 1646DD+) MW HEAD 3R7540 3.
Rev. 1 (S/N 1645DD-) HEAD MIDWAY 3R7512 3.
PISTON MIDWAY 4R7113 4.
TUBE MIDWAY 5R7116 5.
MIDWAY ADI BASE 6R7184-ADI 6.
MW TIE ROD 7M7316 7.
Only in item 20 MW WIPER SEAL 8.
Only in item 20 U-CUP 9.
Only in item 20 O-RING MIDWAY 10.
Only in item 20 BACK UP MIDWAY 11.
Only in item 20 TEFLON SEAL 12.
Only in item 20 LOADER 13.
Only in item 20 WEAR RING 14.
Only in item 20 O-RING 15.
MW PISTON NUT 1 1/4"-12 UNF 2A0025 16.
NUT HEX 3/4-16 PLAIN 803-257C 17.
NUT HEX 3/8-16 PLAIN 803-234C 18.
HHCS 3/8-16X1 3/4 GR5 802-023C 19.
SEAL KIT MW 4.5 RPHCYL 4A7104 810-158C 20.
PIN CLEVIS 1 X 3 1/8 USABLE 805-396C 21.
PIN COTTER 3/16 X 2 805-058C 22.
05/08/14 - 117 - 550-353P
Table of Contents Part Number Index
Section 4: Hydraulics
Hydraulic Cylinder (810-557C 4.50X8X1.50 Rod)
(Applies to 8548DV, 8552DV only)