Great Plains DVN8552 Parts Manual - Manual (Page 95)

Revision Comments Part Description Part No. Ref.
Image No. dwg41918
MIDWAY HARDENED CLEVIS ADI 1M7016-ADI 1.
MW ROD 1 3/8 DIA 2M6816NC 2.
Rev. 2 (S/N 1646DD+) MW HEAD 3R5840 3.
Rev. 1 (S/N 1645DD-) MW HEAD 3R5812 3.
MW PISTON 4R5109 4.
MIDWAY TUBE 5R5116 5.
MIDWAY ADI BASE 6R5164-ADI 6.
MW TIE ROD 4 X 10 CYLINDER 7M6316 7.
Only in item 20 MW WIPER SEAL 8.
Only in item 20 U-CUP 9.
Only in item 20 O-RING MIDWAY 10.
Only in item 20 BACK UP MIDWAY 11.
Only in item 20 TEFLON SEAL 12.
Only in item 20 LOADER 13.
Only in item 20 WEAR RING 14.
Only in item 20 O-RING 15.
MW PISTON NUT 1-14 2A0024 16.
MW TIE ROD NUT 2A0018 17.
NUT HEX 3/8-16 PLAIN 803-234C 18.
HHCS 3/8-16X1 3/4 GR5 802-023C 19.
SEAL KIT MW 4 RPH CYL 4A5103 810-151C 20.
PIN CLEVIS 1 X 3 1/8 USABLE 805-396C 21.
PIN COTTER 3/16 X 2 805-058C 22.
05/08/14 - 95 - 550-353P
Table of Contents Part Number Index
Section 4: Hydraulics
Hydraulic Cylinder (810-138C 4X8X1.38 Rod)
(Applies to 8333DV, 8537DV, 8544DV, 8548DV, 8552DV only)