Great Plains DVN8552 Parts Manual - Manual (Page 41)

Revision Comments Part Description Part No. Ref.
Image No. dwg41473
CENTER PIVOT SPINDLE 550-335H 1.
CENTER WALKING BEAM 550-425H 2.
PIVOT SPINDLE SLEEVE 556-287D 3.
SEAL 2.50IDX3.251DX.47T 816-573C 4.
BRG CONE 1.97ID JLM104948 822-226C 5.
BRG CUP JLM104910 822-225C 6.
WASHER MACH 2.25 X 1.50 X 10GA 804-063C 7.
NUT HEX SLOTTED 1 1/2-12 PLT 803-239C 8.
PIN COTTER 1/4 X 3 PLT 805-115C 9.
See 6-Bolt Hub & Spindle Assembly
for parts
HUB 6-BOLT SPINDLE 2X12.5 890 815-220C 10.
HHCS 5/16-18X4 GR5 802-279C 11.
NUT HEX TOP LOCK 5/16-18 PLT 803-166C 12.
WHEEL 15X6 6 BOLT WHITE 814-220C 13.
TIRE 9.5 L X 15 8 PLY 814-011C 14.
Items 13 & 14. TIRE/WHEEL 9.5LX15 8 PLY WHITE 814-230C 15.
NUT LUG 9/16-18 X 90 PLT 803-061C 16.
GREASE ZERK 1/4-28 THD FORMING 800-080C 17.
05/08/14 - 41 - 550-353P
Table of Contents Part Number Index
Section 3: Transport
Center Walking Beam, 8321DV & 8324DV
(Applies to 8321DV, 8324DV only)