Great Plains DVN8552 Parts Manual - Manual (Page 51)

Revision Comments Part Description Part No. Ref.
Image No. dwg40883
WALKING BEAM SPINDLE 550-338H 1.
WALKING BEAM 550-339H 2.
TUBE RND - 2 OD 550-470D 3.
SEAL OIL 2 X 3.062 X .375 816-579C 4.
BRG CONE 1.62IDX.78WD#LM501349 822-048C 5.
BRG CUP 2.89ODX.58WD #LM501310 822-053C 6.
WASHER MACH 2.25 X 1.50 X 10GA 804-063C 7.
NUT HEX SLOTTED 1 1/2-12 PLT 803-239C 8.
PIN COTTER 1/4 X 3 PLT 805-115C 9.
See 6-Bolt Hub & Spindle Assembly
for parts
HUB 6-BOLT SPINDLE 2X12.5 890 815-220C 10.
PIN CLEVIS 5/16X2 13/16 USABLE 805-324C 11.
PIN COTTER 1/8 X 1 805-363C 12.
WHEEL 15X6 6 BOLT WHITE 814-220C 13.
TIRE 9.5 L X 15 8 PLY 814-011C 14.
Includes items 14 & 15 TIRE/WHEEL 9.5LX15 8 PLY WHITE 814-230C 15.
NUT LUG 9/16-18 X 90 PLT 803-061C 16.
GREASE ZERK 1/4-28 THD FORMING 800-080C 17.
05/08/14 - 51 - 550-353P
Table of Contents Part Number Index
Section 3: Transport
Wing Walking Beam Assembly
(Applies to 8324DV, 8326DV, 8328DV, 8333DV, 8537DV, 8544DV, 8548DV, 8552DV only)