Great Plains CTA4000 HD Operator Manual - Manual (Page 15)

Great Plains Manufacturing, Inc. Introduction 11
2012-11-28 160-037M
Owner Assistance
If you need customer service or repair parts, contact a
Great Plains dealer. They have trained personnel,
repair parts and equipment specially designed for Great
Plains products.
Refer to Figure 3
Your machine’s parts were specially designed and
should only be replaced with Great Plains parts. Always
use the serial and model number when ordering parts
from your Great Plains dealer. The serial-number plate
is located on the left side of the cart frame below the
front hopper.
Record your implement model and serial number here
for quick reference:
Model Number:__________________________
Serial Number: __________________________
Your Great Plains dealer wants you to be satisfied with
your new machine. If you do not understand any part of
this manual or are not satisfied with the service
received, please take the following actions.
1. Discuss the matter with your dealership service
manager. Make sure they are aware of any
problems so they can assist you.
2. If you are still unsatisfied, seek out the owner or
general manager of the dealership.
For further assistance write to:
Product Support
Great Plains Mfg. Inc., Service Department
PO Box 5060
Salina, KS 67402-5060
785-823-3276
Figure 3
Serial Number Plate
17160