Unfolding the implement – Great Plains CTA4000 HD Operator Manual User Manual
Page 35
Advertising
Great Plains Manufacturing, Inc.
Operating Instructions
31
2012-11-28
160-037M
Refer to Figure 35
9.
Remove the wing lock pin from its storage location
just outboard of the wing hinge point.
Refer to Figure 36
10. Install wing lock pins under hinge points to secure
folded wings for transport or parking.
Unfolding the Implement
Refer to Figure 37
1.
Check that the Transport/Field handle is still set to
TRANS, to keep the opener position locked and
prevent unexpected movement during unfold.
Figure 35
Wing Lock Pin Stored
17155
1
Figure 36
Wing Locked Up With Pin
17171
2
Figure 37
Unfold: Check Lift-Lock
26373
Advertising